How To Securely Fix Your Hubcaps

Despite the progress of the hubcaps, as far as the image is concerned, their fixation is still improvable. That is why it is necessary to resort to certain tricks, with which to better secure these decorative elements of your vehicle.

If we take a look at any of the vehicles that we find parked on the street, it likely has alloy wheels. However, this does not mean that hubcaps are already part of history since they are still prevalent in many vehicles on the market. The problem with these elements is that, despite all the progress made in their design and appearance, they still have considerable fragility in their fastening system. So much so that a badly caught pothole and with some depth blows the hubcap off the tire and leads us to lose the piece.

Securely Fix Your Hubcaps

Luckily, this problem also has a home remedy, with which we can fix the hubcaps safely and without losing them because it is quite annoying to spend time buying the best hubcaps ( In this link you find several products to analyze )  to lose them because of a bump. In any case, when implementing any of these systems, it is vital to remember that the hubcaps should not be permanently fixed since sooner or later you will have to access the hardware to change the tire or repair it. 

Using flanges

In recent times, flanges have become an efficient and widely used item. From the use to fix cables and different elements to each other that the police give them to make arrests, the versatility and resistance of these small pieces of moulded plastic is more than evident.

To securely fix a hubcap to your vehicle, it is necessary to see both the area where the metal rim has the holes and the spaces that the hubcap has and how they can fit. Once these spaces have been located, all we have to do is pass the flange inside that hole but taking care that the clamping area of ​​the spine is outside. We complete the fastening by closing the collar on the hubcap, giving it the maximum tension and firmness possible. We will repeat the procedure on at least four of the sides of the wheel, preferably cross or X, cutting the excess plastic from the flange. Don’t forget to keep the valve area well protected to avoid later problems.

Use of adhesives

Another alternative is the use of light adhesives, which are strong enough to hold the hubcaps and prevent the loss but also maintain the ability to remove the hubcap once the tire needs to be handled. Among these fastening elements are silicone and other medium-hard adhesives. However, we must always take into account that the chosen product is suitable for joining plastic and metal, which will be the two elements to be entered.

Additionally, this adhesive must be resistant to humidity, for rainy days or when we wash the car. And we cannot forget that the resin must be natural to remove or cut when it is necessary to carry out maintenance work on your tires. Something that will lead you to have to replace the adhesive again, once you finish the maintenance of the wheels.

Anti-theft bolts

If you have some time and skill, you may want to design an anti-theft bolt system for your hubcaps. For this, you will need two or four metal bolts of a specific size and thickness as well as some washers and screws that match them. Before starting, it is worth mentioning that this system only works for those flat hubcaps and that have spaces that can allow the bolts to pass, since drilling them is a complex task and can end up fracturing it.

To execute this assembly, you will have to start by welding the bolts on the corresponding rim area, verifying that this soldier is resistant and that it runs in the correct areas of the rim. Once the locks have been welded and cooled, all we have to do is mount the wheel on the vehicle, put the hubcap in place, snapping the bolts into place and complete the assembly. For this, both the washers and the closing screws are mounted, which will prevent you from having problems both when fixing the hubcap and removing it when necessary.

Use of anti-theft hubcaps

To avoid having to fight with the hubcaps, there is one more alternative, which is the use of anti-theft hubcaps. These hubcaps have the advantage of having a design similar to that of alloy wheels so that the hubcaps are directly attached to the bolts on which the rim is supported. When fastened with the wheel clamping screws, it is impossible for the hubcaps to be stolen and, additionally, it is also impossible for them to be lost, unless they break or break.

The only drawback of these hubcaps is that their assembly is somewhat more complicated than that of the conventional flange and metal ring models since to install the hubcaps it is necessary to remove the bolts that hold the tires and retighten them later. A process that you will have to repeat when doing maintenance operations, although with the advantage that this process is more standardised, unlike what happens when using the bolts or the adhesive system that we have discussed. Besides, there is no need to replace that adhesive or replace the flanges to leave the hubcap fixed in place again.

By the way, if you finally bet on this option, you must verify that the format of the hubcap is adequate, both for the diameter of the rim and for the placement of the bolts concerning the position of the hubcap. If you do not, you may not be able to mount.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top